Intake manifold
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Intake manifold › Intake manifold
Fuel and emission control systemsIntake manifold
INTAKE MANIFOLD
Removal
Warning
• Before removal, release the fuel pressure from the fuel system to reduce the possibility of injury or fire. (Refer to page F–101.)
- Remove the throttle body. (Refer to page F–94.)
- Remove the air valve
- Disconnect the vacuum hoses.
- Remove the accelerator cable.
5. Disconnect the fuel hoses.
6. Disconnect the connectors from the injectors.
7. Remove the delivery pipe and injectors.
8. Remove the injector harness.
- Remove the intake marifold bracket.
9. Remove the intake manifold.
Installation
Install in the reverse order of removal.
Note
• Use a new mounting gasket.
Tightening torque:
Intake manifold and delivery pipe
19—25 N·m (1.9—2.6 m·kg, 14—19 ft-lb)
Injector harness and bracket
7.8—11 N·m (80—110 cm·kg, 69—95 in-lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTExhaust gasketSearch: Mazda MX-5 1990 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.