Replacement
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Replacement › Replacement
Engine electrical systemReplacement
Note
- The factory-installed battery in the MX-5 Miata cannot be purchased over the counter. When replacing the battery, replace it with a Mazda genuine battery (with vent manifold) or equivalent and use a Mazda genuine battery replacement kit (battery tray, battery clamp, and clamp bolt; Part number NAY1 56 020A) or equivalent.
Battery replacement using the Mazda genuine battery replacement kit is as follows.
- Remove the battery cover.
Warning
- The negative battery cable must be removed first and installed last.
- Disconnect the battery cables from the battery.
- Remove the battery clamp.
- Remove the battery.
- Disconnect the battery vent hoses.
- Remove the battery tray.
- Remove the battery bracket.
- Reverse the battery clamp bracket as shown.
- Change the position of the battery bracket to Ⓑ as shown.
Warning
- Install the battery vent hoses correctly to reduce the possibility of injury or fire.
- Install the new battery using the battery replacement kit (Part number NAY1 56 020A).
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.