Pilot bearing
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- H Clutch › Pilot bearing
ClutchPilot bearing · page 1 of 2
PILOT BEARING
INSPECTION
Turn the bearing while applying force in the axial direction. If the bearing sticks or has excessive resistance, replace it.
FLYWHEEL
INSPECTION
Note
• Minor scoring or burning should be removed with emery paper.
Note
• The beveled side of the ring gear must face the engine side.
(1) Heat the ring gear with a blowtorch. Tap around the gear to remove it from the flywheel.
(2) Heat the new ring gear to 250—300°C (480—570°F); then fit it onto the flywheel.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.