Each gear and main drive gear
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Inspection › Each gear and main drive gear
Manual transmissionEach gear and main drive gear
Inspect all parts and repair or replace as necessary.
Each gear and main drive gear
- Inspect the synchronizer cones for wear.
- Inspect the individual gear teeth for wear and cracks.
- Inspect the synchronizer ring matching teeth for damage and wear.
- Inspect the main drive gear splines for damage and wear.
Mainshaft
- Measure the mainshaft runout.
Maximum runout: 0.03mm (0.0012 in)
- Inspect splines for damage or wear.
- Measure the clearance between mainshaft and gear (or bush).
Maximum clearance: 0.15mm (0.006 in)
Countershaft
- Inspect the gear teeth for wear and cracks.
- Inspect the splines for damage and wear.
Clutch hub assembly
- Inspect the clutch hub sleeve and hub operation.
- Inspect the individual gear teeth for damge, wear, and cracks.
- Inspect the synchronizer key for damage, wear, and cracks.
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.