Synchronizer ring
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- J Manual transmission (J) › Synchronizer ring
Manual transmissionSynchronizer ring
- Measure the clearance between hub sleeve and shift fork.
Standard clearance: 0.2—0.3mm (0.008—0.012 in)
Maximum: 0.5mm (0.020 in)
Synchronizer ring
- Inspect the individual synchronizer ring teeth for wear and cracks.
- Inspect the taper surface for wear and cracks.
Note
• Set the synchronizer ring squarely in the gear; then measure around the circumference.
- Measure the clearance the between synchronizer ring and flank surface of gear.
Standard clearance: 1.5mm (0.059 in)
Minimum: 0.8mm (0.031 in)
Bearing
Inspect for damage and rough rotation.
Reverse idler gear and shaft
- Inspect the gear teeth for wear and cracks.
- Measure the clearance between the reverse idler gear bushing and shaft.
Standard clearance:
0.02—0.05mm (0.0008—0.0020 in)
Maximum: 0.15mm (0.006 in)
Parts & tools for this job For 1990 Mazda MX-5
- PARTClutch kitSearch: Mazda MX-5 1990 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Mazda MX-5 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.