Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- M Front and rear axles › Inspection
Front and rear axlesInspection
05U0MX-010
Inspection
Wheel bearing play
- Remove the wheel, brake caliper assembly, and disc plate, referring to Removal note below.
- Position a dial indicator against the wheel hub. Push and pull the wheel hub by hand in the axial direction and measure the wheel bearing play.
If the bearing play exceeds specification, check and adjust the locknut torque or replace the wheel hub assembly if necessary.
Maximum wheel bearing play: 0.05mm (0.002 in)
Removal note
Brake caliper assembly
Note
- For easier installation, do not depress the brake pedal after removing the brake caliper assembly.
05U0MX-011
Tie-rod end
Loosen the nut and disconnect the tie-rod end with the SST.
49 0118 850C
05U0MX-012
Lower arm
Loosen the nut and disconnect the lower arm with the SST.
49 0727 575
9MU0MX-010
Upper arm
Loosen the nut and disconnect the upper arm with the SST.
49 0118 850C
05U0MX-013
Parts & tools for this job For 1990 Mazda MX-5
- PARTFront wheel bearingSearch: Mazda MX-5 1990 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Mazda MX-5 1990 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.