Steering wheel and column
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Steering wheel and column › Steering wheel and column
STEERING WHEEL AND COLUMN
Caution
• Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery. (Refer to page T–113.)
On-vehicle Inspection
Steering wheel play
With the wheels in the straight-ahead position, gently turn the steering wheel to the left and right and verify that the play is within specification.
Play: 0—30mm (0—1.18 in)
Note
• If the play exceeds specification, either the steering joints are worn or the backlash of the steering gear is excessive.
Looseness or play of steering wheel
Move the steering wheel in directions ①, ②, and ③ to check for column bearing wear, steering shaft joint play, steering wheel looseness, and column looseness.
Steering wheel effort
- Jack up the front of the vehicle.
- Turn the steering wheel fully to the left and right at least 5 times.
- Move the steering wheel to put the wheels in the straight-ahead position.
- Attach a pull scale to the outermost point of the steering wheel spoke.
Then, starting with the wheels in the straight-ahead position, measure the effort required to turn the steering wheel to the left and to the right.
Steering wheel effort:
4.9—29.4 N (0.5—3.0 kg, 1.1—6.6 lb)
[during one turn of steering wheel]
- If not within specification, check the following: rotation starting torque of pinion, rotation torque of each ball joint, and steering joints.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Mazda power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.