Disassembly / Inspection / Assembly
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Caliper (P) › Disassembly / Inspection / Assembly
Braking systemDisassembly / Inspection / Assembly
Disassembly / Inspection / Assembly
- Disassemble in the order shown in the figure, referring to Disassembly Note.
- Install in the reverse order of removal.
- Dust seal
Inspect for damage and poor sealing - Piston
Disassembly ............................ page P–21
Inspect for wear and rust - Piston seal
- Bleeder screw
- Caliper body
Inspect for damage and cracks
Disassembly note
Piston
Place a piece of wood in the caliper; then blow compressed air through the hole to force the piston out of the caliper.
Caution
- Blow the compressed air slowly to prevent the piston from popping out.
Parts & tools for this job For 1990 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 1990 brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.