Quick Inspection, On-vehicle
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Rear brake (DISC) › Quick Inspection, On-vehicle
Braking systemQuick Inspection, On-vehicle
Quick Inspection, On-vehicle
Disc pad
- Jack up the rear of the vehicle and support it with safety stands.
- Remove the wheels.
- Sight through the caliper inspection hole and verify the remaining thickness of the pad.
Thickness: 1.0mm (0.04 in) min.
Replacement
Disc pad
- Remove in the order shown in the figure, referring to Removal Note.
- Install in the reverse order of removal, referring to Installation Note.
- Plug
- Manual adjustment gear
- Lock bolt
- M-spring
- Disc pad
- Shim
- Guide plate
| Removal | below |
| Installation | page P–23 |
| Inspection | page P–24 |
Removal note
Manual adjustment gear
Turn the manual adjustment gear counterclockwise with an Allen wrench to pull the brake caliper piston back.
Parts & tools for this job For 1990 Mazda MX-5
- PARTRear brake padsSearch: Mazda MX-5 1990 rear brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.