Disassembly / Inspection / Assembly
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Disassembly / Inspection / Assembly › Disassembly / Inspection / Assembly
Braking systemDisassembly / Inspection / Assembly
Disassembly / Inspection / Assembly
- Disassemble in the order shown in the figure, referring to Disassembly Note.
- Install in the reverse order of removal.
- Dust seal
Inspect for damage and poor sealing - Piston
Disassembly ........................ below
Assembly ............................ page P–26
Inspect for wear and rust - Manual adjustment gear
- Snap ring
- Adjusting bolt
- O-ring
- Connecting link
- Piston seal
- Spring
- Operating lever
- Cap and bleeder screw
- Caliper body
Inspect for damage and cracks
Disassembly note
Piston
- Turn the adjustment gear clockwise with an Allen wrench to remove the piston from it. (Turn the adjustment gear until it turns easily.)
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.