Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Inspection (P) › Inspection
Braking systemInspection
Inspection
Check the following and repair or replace parts as necessary.
Disc pad
- Oil or grease on facing.
- Abnormal wear or cracks.
- Deterioration or damage by heat.
- Remaining lining thickness.
Thickness: 1.0mm (0.04 in) min.
Disc plate
- Runout.
Runout: 0.1mm (0.004 in) max.
Caution
- There must be no wheel bearing looseness.
- The measurement must be taken at the outer edge of the disc plate surface.
- Wear or damage.
Thickness
Standard: 9.0mm (0.35 in)
Minimum: 7.0mm (0.28 in)
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.