Removal / Inspection / Installation
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- P Braking system › Removal / Inspection / Installation
Braking systemRemoval / Inspection / Installation
Removal / Inspection / Installation
- Block the wheels firmly.
- Release the parking brake.
- Remove in the order shown in the figure.
- Inspect all parts and repair or replace as necessary.
- Install in the reverse order of removal, referring to Installation Note.
- After installation:
Adjust the parking lever stroke. (Refer to page P–27.)
- Screw
- Cover
- Bolt
- Parking brake switch
Installation.................................... page P–28 - Adjusting nut and clip
- Cap
- Spring
Inspect for weakness - Bolt
- Parking brake lever
Inspect for damage and cracks
Installation note
Parking brake switch
- Install the parking brake switch so that it contacts the parking brake lever when the lever is fully released.
- Turn the ignition switch ON, and check that the parking brake warning lamp illuminates with the lever pulled one notch.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.