Troubleshooting guide
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Troubleshooting guide › Troubleshooting guide
Braking systemTroubleshooting guide
TROUBLESHOOTING GUIDE
| Problem | Possible cause | Action | Page |
|---|---|---|---|
| Brakes do not release | Improper return of parking brake cable or improper adjustment | Repair or adjust | P–29 |
| Parking brake does not hold well | Excessive lever stroke | Adjust | P–27 |
| Brake cable stuck or damaged | Repair or replace | P–29 | |
| Brake fluid or oil on pads | Clean or replace | P–18,22 | |
| Hardening of pad surfaces or poor contact | Grind or replace | P–18,22 |
PARKING BRAKE LEVER
Inspection
- Depress the brake pedal several times.
- Verify that the stroke is within specification when the parking brake lever is pulled with a force of 98 N (10 kg, 22 lb).
Stroke: 5—7 notches
Adjustment
- Jack up the rear of the vehicle until the wheels are free to turn and support it with stands.
- Depress the brake pedal several times.
- Turn the adjusting nut to adjust the lever stroke.
- Check that the parking brake warning light illuminates when the brake lever is pulled one notch.
Caution
- Verify that the brakes do not drag.
- Lower the vehicle.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Mazda MX-5
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.