R Suspension
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- R Suspension › R Suspension
SuspensionR Suspension
| Camber | Left wheel | Right wheel | ||
|---|---|---|---|---|
| Front cam | Rear cam | Front cam | Rear cam | |
| Positive | Counter-clockwise | Clockwise | Clockwise | Counter-clockwise |
| Negative | Clockwise | Counter-clockwise | Counter-clockwise | Clockwise |
Note
- Turning the front cam one graduation changes the camber about 15’ and the toe-in about 2.8mm (0.11 in). Turning the rear cam one graduation changes the camber about 6’ and the toe-in about 2.8mm (0.11 in).
- If the cam cannot be turned far enough to make the adjustment, begin again at adjustment of the toe-in using the other cam.
- Tighten the nuts.
Tightening torque:
73—95 N·m (7.4—9.7 m-kg, 54—70 ft-lb)
Parts & tools for this job For 1990 Mazda MX-5
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Mazda MX-5 1990 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.