Removal note
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Lower arm ball joint › Removal note
Removal note
Lower arm ball joint
Separate the ball joint from the knuckle with the SST.
Ball joint dust boot
Remove the dust boot with a chisel.
Caution
• Do not damage the ball joint stud.
Installation note
Ball joint dust boot
1. Liberally coat the inside of the new dust boot with grease.
2. Press the dust boot onto the ball joint with the SST.
Inspection
Lower arm ball joint
Ball joint rotation torque
1. Shake the ball joint stud 5 times.
2. Connect the SST to the ball stud, and measure the rotation torque with a pull scale.
Rotation torque:
0.5—1.5 N·m (5—15 cm-kg, 4.3—13 in-lb)
Pull scale reading:
4.9—14.7 N (0.5—1.5 kg, 1.7—3.3 lb)
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Mazda power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.