Disassembly / Inspection / Assembly
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Shock absorber and spring › Disassembly / Inspection / Assembly
SuspensionDisassembly / Inspection / Assembly
Removal note
Shock absorber and spring
1. Loosen the lower arm bolts.
2. Lower the lower arm to remove the shock absorber.
Caution
• Do not lower the arm excessively, which may damage the brake hose.
Disassembly / Inspection / Assembly
- Disassemble in the order shown in the figure, referring to Disassembly Note.
- Inspect all parts and repair or replace as necessary.
- Assemble in the reverse order of disassembly, referring to Assembly Note.
- Tighten all nuts and bolts to the specified torques, referring to the figure.
- Cap
- Mounting plate
- Bound stopper
Inspect for damage - Coil spring
Disassembly Note .................... page R–14
Assembly Note....................... page R–14 - Shock absorber
Inspect for oil leakage and abnormal noise
Parts & tools for this job For 1990 Mazda MX-5
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Mazda MX-5 1990 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.