REC-FRESH wire
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- S Body › REC-FRESH wire
BodyREC-FRESH wire
05U0UX-161
REC-FRESH wire
- Set the selector lever to FRESH position.
- Connect and clamp the wire with the shutter lever on the blower unit at its closest point.
Caution
- After installation, move the REC-FRESH lever to be sure the wire is securely attached, and that it moves the full stroke from REC to FRESH.
05U0SX-106
Temperature blend wire
- Set the temperature blend lever to MAX-HOT position.
- Connect and clamp the wire with the shutter lever on the heater unit all the way to the right.
Caution
- After installation, move the temperature blend lever to be sure the wire is securely attached, and that it moves the full stroke from HOT to COLD.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.