S Body
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- S Body › S Body
BodyS Body
Removal Note
Center lower panel assembly
The clips are where shown.
Meter hood assembly
The clips are where shown.
Center panel assembly
The clips are where shown.
Adjustment Note
Airflow mode wire
1. Set the airflow mode control lever to VENT position.
2. Connect and clamp the wire with the shutter lever on the heater unit at its closest point.
Caution
- After installation, move the airflow mode control lever to be sure the wire is securely attached, and that it moves the full stroke from DEF to VENT.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.