S Body
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- S Body › S Body
BodyS Body · page 1 of 3
- Remove the screws, and remove the cables from the rear of the link assembly.
Note
- Unfold the convertible top.
- Remove the rivets from the link assembly with a drill, and remove the cables from the link assembly.
Drill size: φ4.0mm (φ0.16 in)
- Peel off the Velcro at the rear bow.
- Pry back the bow retainers with a protected screwdriver.
- Remove the top fabric from the bows.
- Remove the cables from the cable guide.
- Remove the top fabric and cables from the link assembly.
- Remove the cables from the top fabric.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Mazda touch up paint
- PARTPanel clip assortmentSearch: Mazda panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.