Adjustment
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Adjustment and Inspection (T) › Adjustment
Body electrical systemAdjustment
Adjustment
Stoplight switch
- Adjust the brake pedal height. (Refer to Section P.)
- Disconnect the stoplight switch connector.
- Loosen the stoplight switch locknut.
- Turn the stoplight switch until it contacts the pedal arm. Turn an additional 1/2 turn.
- Tighten the locknut.
Locknut tightening torque:
14—18 N·m (1.4—1.8 m-kg, 120—156 in-lb)
Inspection
Stoplight switch
- Disconnect the stoplight switch connector.
- Check continuity between terminals of the switch.
| Inspection condition | Terminal | |
|---|---|---|
| a | b | |
| Brake pedal depressed | ○——○ | ○——○ |
| Brake pedal released | ||
○——○: Indicates continuity
- If not as specified, replace the stoplight switch.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.