Headlight aiming
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Adjustment (T) › Headlight aiming
Body electrical systemHeadlight aiming
Headlight aiming
- Adjust the tire air pressure to specification.
- Turn on the retractor switch to raise the retractable headlights.
- Position the unloaded vehicle on a flat, level surface.
- Adjust the headlights to meet local regulations by turning the two adjusting screws.
Retractor hinge
- Begin with the headlights fully retracted.
Caution
- Before disconnecting the negative battery cable, verify the ID code number of audio anti-theft function.
- If not, an audio unit may not operate after reconnecting the negative battery cable.
- Disconnect the negative battery cable.
- Disconnect the motor link.
- Lower the retractor hinge until the hinge is stopped by the stop.
- Adjust the stop so that the headlight lid is flush with the fender and hood.
Parts & tools for this job For 1990 Mazda MX-5
- PARTReplacement bulbsSearch: Mazda MX-5 1990 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.