Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Inspection › Inspection
Body electrical systemInspection
Inspection
Retractor motor
- Disconnect the motor link.
- Disconnect the retractor motor connector.
- Connect 12V to terminal f and ground terminal a of the motor connector.
- Check the motor operation when connecting 12V as shown.
| Terminal | Motor operation | |
|---|---|---|
| 12V | Ground | |
| c | a | Motor rotates to raised position |
| d | a | Motor rotates to retracted position |
- If not as specified, replace the retractor motor.
Retractor switch
- Remove the retractor switch.
- Check for continuity between terminals of the switch.
| Switch | Terminal | ||
|---|---|---|---|
| b | d | f | |
| Off | ○——○ | ○——○ | |
| On | ○——○ | ○——○ | |
○——○: Indicates continuity
- If not as specified, replace the retractor switch.
Headlight switch
U.S. spec.
- Remove the knee protector.
- Disconnect the combination switch connector.
- Check for continuity between terminals of the switch.
| Position | Terminal | |||||||
|---|---|---|---|---|---|---|---|---|
| E | HL | HU | TNS | HEAD | BA | B | ||
| Headlight | Low beam | ○——○ | ○——○ | |||||
| ○——○ | ○——○ | |||||||
| High beam | ○——○ | ○——○ | ||||||
| ○——○ | ○——○ | |||||||
| Passing | ○——○ | ○——○ | ||||||
| Tail, Parking | ○——○ | ○——○ | ||||||
○——○: Indicates continuity
- If not as specified, replace the combination switch as an assembly.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.