Headlight relay (U.S. spec.)
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- [T] › Headlight relay (U.S. spec.)
Body electrical systemHeadlight relay (U.S. spec.)
Canada spec.
- Remove the column cover and disconnect the headlight switch connectors.
- Check for continuity between terminals of the switch.
Indicates continuity
Headlight relay (U.S. spec.)
- Check continuity between terminals 3 and 4.
| Terminal | Continuity |
|---|---|
| 3—4 | No |
- If not as specified, replace the headlight relay.
- If correct, go to Step 4.
- Apply 12V to terminal 1 and ground terminal 2. Check for continuity between terminals 3 and 4.
| Terminal | Continuity |
|---|---|
| 3—4 | Yes |
- If not as specified, replace the headlight relay.
Headlight retractor relay
- Check continuity between terminals of the relay.
| Terminal | Continuity |
|---|---|
| 1—4 | Yes |
| 2—4 | No |
| 3—5 | Yes |
- If not as specified, replace the retractor relay.
- If correct, go to Step 4.
- Apply 12V to terminal 3 and ground terminal 5. Check continuity between terminals of the relay.
| Terminal | Continuity |
|---|---|
| 1—4 | No |
| 2—4 | Yes |
- If not as specified, replace the retractor relay.
Parts & tools for this job For 1990 Mazda MX-5
- PARTReplacement bulbsSearch: Mazda MX-5 1990 bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.