Lights, dimmer, and passing switch
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- T Body electrical system › Lights, dimmer, and passing switch
Body electrical systemLights, dimmer, and passing switch
Canada spec.
- Check the continuity or resistance between the terminals described.
- If the continuity or resistance is not as specified, replace the combination switch.
Lights, dimmer, and passing switch
| Position | Terminal | HB | HL | HU | BA | BTN | TNS | |
|---|---|---|---|---|---|---|---|---|
| Headlight | Low beam | ○—○ | ○ | ○—○ | ||||
| High beam | ○—○ | ○ | ○ | ○—○ | ||||
| Passing | ○—○ | |||||||
| Tail, Parking | ○—○ | |||||||
| ○—○: Indicates continuity | ||||||||
Turn signal switch
| Position | Terminal | FU | TL | TR | |
|---|---|---|---|---|---|
| Left | ○—○ | ||||
| Right | ○ | ○ | |||
| ○—○: Indicates continuity | |||||
Windshield wiper and washer switch
| Position | One touch Terminal | AS | WIG | SWL | SWH | E | SW | |
|---|---|---|---|---|---|---|---|---|
| Wiper switch | OFF | OFF | ○—○ | |||||
| ON | ○ | ○ | ||||||
| INT | ○ | ○ | ||||||
| I (Low) | ○ | ○ | ||||||
| II (High) | ○—○ | |||||||
| Washer switch ON | ○—○ | |||||||
| ○—○: Indicates continuity | ||||||||
Parts & tools for this job For 1990 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.