Inspection
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Switch › Inspection
Body electrical systemInspection
COMBINATION SWITCH CONNECTOR
Inspection
U.S. spec.
- Disconnect the negative battery cable.
- Remove the knee protector.
- Disconnect the combination switch connector.
- Check the continuity or the resistance between the terminals described with an ohmmeter.
- If the continuity or resistance is not as specified, replace the combination switch as an assembly.
Lights, dimmer, and passing switch
| Position | Terminal | ||||||
|---|---|---|---|---|---|---|---|
| E | HL | HU | TNS | HEAD | BA | B | |
| Headlight | Low beam | ○ | ○ | ○ | ○ | ||
| High beam | ○ | ○ | ○ | ○ | |||
| Passing | ○ | ○ | |||||
| Tail, Parking | ○ | ○ | |||||
○——○: Indicates continuity
Turn signal switch
| Switch | Terminal | ||
|---|---|---|---|
| FU | TL | TR | |
| Left | ○ | ○ | |
| Right | ○ | ○ | |
○——○: Indicates continuity
Windshield wiper and washer switch
| Position | One touch | Terminal | |||||
|---|---|---|---|---|---|---|---|
| AS | WIG | SWL | SWH | INT | SW | ||
| Wiper switch | OFF | OFF | ○ | ○ | |||
| ON | ○ | ○ | |||||
| INT | ○ | ○ | ○ | ||||
| I (Low) | ○ | ○ | |||||
| II (High) | ○ | ○ | |||||
| Washer switch ON | ○ | ○ | |||||
○——○: Indicates continuity
Cruise control switch
| Position | Terminal | ||
|---|---|---|---|
| SE | RE | E | |
| SET/COAST | ○ | ○ | |
| RESUME/ACCEL | ○ | ○ | |
○——○: Indicates continuity
Parts & tools for this job For 1990 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.