Step 1
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Troubleshooting › Step 1
Symptom: Stoplights do not operate (all).
Step 1
Check STOP 15A fuse in the fuse box.
If the fuse is burned, replace it. Check and repair the wire harness, if necessary.
If the fuse is OK, go to Step 2.
Step 2
Measure the voltage at the following terminal-wires of the stoplight switch connector.
| Inspection condition | Wire | Voltage | Action |
|---|---|---|---|
| Constant | (W/G) | 12V | Next check wire (G) |
| 0V | Repair wire (W/G) (STOP 15A fuse—Stoplight switch) | ||
| Brake pedal depressed | (G) | 12V | Go to Step 3 |
| 0V | Check stoplight switch |
Step 3
Check the stoplight bulbs.
If a bulb is burned replace it.
If the bulbs are OK, go to Step 4.
Step 4
Measure the voltage at the following terminal-wires of the right and left stoplight connectors.
| Inspection condition | Wire | Voltage | Action |
|---|---|---|---|
| Brake pedal depressed | (G) | 12V | Next check wire (B) |
| 0V | Repair wire (G) (Stoplight switch—Stoplight) | ||
| (B) | 12V | Repair ground wire (B) | |
| 0V | Check for poor connection of connectors |
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.