Step 1
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Troubleshooting (2) › Step 1
Body electrical systemStep 1
Caution
• Before troubleshooting, read SERVICE PRECAUTION on page T–133.
05U0TX-371
Step 1
Measure the battery voltage.
| Battery voltage | Action |
|---|---|
| More than 9V | Go to Step 2 |
| Less than 9V | Charge battery by recommended procedure (Refer to Section G) |
05U0TX-372
Step 2
- Check the following fuses.
| Fuse | Location |
|---|---|
| INJ 30A | Main fuse block |
| AIR BAG 15A | Fuse box |
| AIR BAG 10A | Main fuse block |
| ENGINE 15A | Fuse box |
- If a fuse burned, replace it.
- If the fuses are OK, go to Step 3.
05U0TX-373
Step 3
- Disconnect the negative battery cable.
- Remove the knee protector, and disconnect the clock spring connectors (Orange and blue).
- Check for proper connection of the backup battery connector.
- If the connector is loose or disconnected, reconnect it.
- If the connection is OK, go to Step 4.
05U0TX-374
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.