M. front and rear axles
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- TD Technical data › M. front and rear axles
TD Technical dataM. front and rear axles
M. FRONT AND REAR AXLES
| Item | Transmission model | |||
|---|---|---|---|---|
| Front axle | Type | Double-wishbone | ||
| Bearing | Angular ball bearing | |||
| Wheel bearing play mm (in) | Maximum | 0.05 (0.002) | ||
| Rear axle | Type | Double-wishbone | ||
| Bearing | Angular ball bearing | |||
| Wheel bearing play mm (in) | Maximum | 0.05 (0.002) | ||
| Differential | Type | Standard | Viscous L.S.D. | |
| Reduction gear | Hypoid gear | |||
| Reduction ratio | 4.300 | |||
| Differential gear | Straight-bevel gear | |||
| Ring gear size mm (in) | 162.16 (6.38) | |||
| Oil | Grade | API service GL-5 | ||
| Viscosity | Above −18°C (0°F): SAE 90 Below −18°C (0°F): SAE 80W | |||
| Capacity liters (Us qt, Imp qt) | 0.65 (0.69, 0.57) | |||
| Drive pinion preload (without oil seal) N·m (cm-kg, in-lb) | 0.3—0.7 (3—7, 2.6—6.1) | |||
| Backlash mm (in) | Side gear and pinion gear | 0—0.1 (0—0.004) | ||
| Final gear | 0.09—0.11 (0.0035—0.0043) | |||
| Length (Pilot section to pilot section) mm (in) | 150.20 +0-0.72 (5.913 +0-0.028) | |||
Viscous L.S.D.: Viscous Limited Slip Differential
N. STEERING SYSTEM
| Item | Type | Manual steering | Power steering | |
|---|---|---|---|---|
| Steering wheel | ||||
| Outer diameter mm (in) | 370 (14.6) | |||
| Free play mm (in) | 0—30 (0—1.18) | |||
| Wheel effort N (kg, lb) | 4.9—29.4 (0.5—3.0, 1.1—6.6) | 23.5—35.3 (2.4—3.6, 5.3—8.0) | ||
| Lock-to-lock turns | 3.36 | 2.8 | ||
| Steering Shaft | ||||
| Shaft type | Collapsible, non-tilt | |||
| Joint type | 2-cross joint | |||
| Power steering system | ||||
| Power assist type | Engine speed sensing | |||
| Gear type | Rack-and-pinion | |||
| Gear ratio | ∞ (infinite) | |||
| Rack stroke mm (in) | 121.0 (4.76) | |||
| Power steering fluid | ATF DEXRON-II or M-III | |||
| Fluid capacity liter (Us qt, Imp qt) | 0.8 (0.85, 0.70) | |||
| Fluid pressure kPa (kg/cm², psi) | 7,603—8,339 (77.5—85.0, 1,102—1,209) | |||
P. BRAKING SYSTEM
| Item | Specifications | |
|---|---|---|
| Brake pedal | Height (with carpet) mm (in) | 171—181 (6.73—7.13) |
| Free play mm (in) | 4—7 (0.16—0.28) | |
| Reserve travel mm (in) (without carpet, clearance when pedal is depressed at 589 N (60 kg, 132 lb)) | 95 (3.74) | |
| Master cylinder | Type | Tandem |
| Bore mm (in) | 22.22 (0.87) | |
| Fluid type | SAEJ1703 or FMVSS116, DOT-3 | |
Parts & tools for this job For 1990 Mazda MX-5
- PARTFront wheel bearingSearch: Mazda MX-5 1990 front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Mazda MX-5 1990 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.