Q. wheels and tires (TD Technical data)
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Technical Data › Q. wheels and tires
TD Technical dataQ. wheels and tires
| Item | Specifications | |
|---|---|---|
| Front brake (Disc) |
Type | Disc |
| Thickness of pad mm (in) | Standard | 9.5 (0.37) |
| Limit | 1.0 (0.04) | |
| Thickness of disc plate mm (in) |
Standard | 18.0 (0.71) |
| Limit | 16.0 (0.63) | |
| Disc plate runout mm (in) | 0.1 (0.004) max. | |
| Wheel cylinder bore mm (in) | 51.1 (2.01) | |
| Rear brake (Disc) |
Type | DISC |
| Thickness of pad mm (in) | Standard | 8.0 (0.31) |
| Limit | 1.0 (0.04) | |
| Thickness of disc plate mm (in) |
Standard | 9 (0.35) |
| Limit | 7 (0.28) | |
| Wheel cylinder bore mm (in) | 31.75 (1.25) | |
| Parking brake | Lever notches [Pulled at 98 N (10 kg, 22 lb)] |
5—7 |
| Power brake unit | Type | Single diaphragm |
| Diameter mm (in) | 214 (8.0) | |
| Push rod-to-piston clearance mm (in) | When vacuum applied to the unit is approx. 500 mmHg (19.7 inHg) 0.1—0.3mm (0.004—0.012 in) |
|
| Fluid pressure per treading force kPa (kg/cm², psi)/N (kg, lb) |
1,079—1,177 (11—12, 156—171)/196 (20, 44) at 0 mmHg (0 inHg) min. 5,199—5,494 (53—56, 754—796)/196 (20, 44) at 500 mmHg (19.7 inHg) min. |
|
| Rear wheel hydraulic control system | Type | PBV |
| Bend portion (Rear brake pressure) kPa (kg/cm², psi) |
2,943 (30, 427) | |
Q. WHEELS AND TIRES
| Item | Type | Standard | Temporary spare |
|---|---|---|---|
| Wheel | Size | 14 x 5 1/2-JJ | 14 x 4T |
| Offset mm (in) | 45 (1.77) | ||
| Pitch circle diameter mm (in) | 100 (3.94) | ||
| Material | Aluminum alloy | Steel | |
| Tire | Size | P185/60R14 82H | T115/70D14 |
| Air pressure kPa (kg/cm², psi) | 177 (1.8, 26) | 412 (4.2, 60) | |
| Wheel and tire | Runout limit Horizontal |
2.0 (0.079) | |
| mm (in) Vertical | 1.5 (0.059) | ||
| Maximum unbalance (at rim edge) g (oz) | 10 (0.35) | ||
R. SUSPENSION
| Item | Specifications | |
|---|---|---|
| Front suspension | ||
| Type | Double-wishbone | |
| Stabilizer | Type | Torsion bar |
| Diameter mm (in) | 19 (0.75) | |
| Shock absorbers | Cylindrical double-acting, low-pressure gas charged | |
| Coil springs | Identification color | Red |
| Wire diameter mm (in) | 10.8 (0.43) | |
| Coil inner diameter mm (in) | 83 (3.27) | |
| Free length mm (in) | 282.5 (11.12) | |
| Coil number | 5.91 | |
Parts & tools for this job For 1990 Mazda MX-5
- TOOLTyre pressure gaugeSearch: digital tyre pressure gauge
- TOOLTorque wrenchSearch: 1/2 inch torque wrench
- TOOLBreaker barSearch: breaker bar
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.