Handling connectors
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Z Wiring diagram › Handling connectors
Handling connectors
Caution
● Be sure to grasp the connectors, not the wires, when disconnecting them.
| Connector removal | Checking connector engagement | Checking for loose terminal | Repairing terminal |
|---|---|---|---|
| Push type |
Caution Using a matching male terminal make sure there is no looseness in the female terminal. |
Caution Verify that terminals are not pushed out of the connector when engaged. |
<CPU connector>
|
|
<General connector >
Lift the tab with a small screwdriver and remove the terminal. |
|||
|
<Round connectors>
|
|||
| Pull up type |
Lightly pull each wire to verify that the terminal does not pull out of the connector. |
<Common ground connector>
|
|
| Spring type |
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.