Precautions when servicing electrical system
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- Precautions when servicing electrical system › Precautions when servicing electrical system
●Note the following items when servicing the electrical system.
●Do not alter the wiring or electrical equipment in any way as this may damage the vehicle or cause a fire due to shorting or overcapacity of a circuit.
●Always disconnect the negative (–) battery cable first and reconnect it last when disconnecting the battery.
Caution
●Be sure that the ignition and other switches are OFF before disconnecting or connecting the battery terminals.
Failure to do so may damage the semi-conductor components.
●Secure harnesses with a clamp when provided to take up any slack.
Caution
●Clamp all harnesses near vibrating components(e.g. the engine) to remove any slack and prevent contact due to vibration.
●Do not handle roughly or drop electrical components.
●Replace blown fuses with ones having the same designated capacity.
Caution
●Replacing a fuse with one of a larger capacity than designated may damage components or cause an electrical fire.
●Tape areas of the harness that may rub or bump against sharp edges to protect it from damage.
●Be sure that the harness is not caught or damaged when mounting components.
●Disconnect heat sensitive parts (e.g. relays, ECU) when performing maintenance where temperatures may exceed 80°C (176°F) (i.e.welding).
● Make sure that the connectors are securely connected when installed.
Parts & tools for this job For 1990 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.