Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)13 · Body and cab accessories
13 · Body & interior

Center speaker inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Entertainment › Center speaker inspection
Body and cab accessoriesCenter speaker inspection
ACCESSORIES & BODY, CAB – Entertainment – figure
Fig. 19: Inserting Tape-Wrapped Flathead Screwdriver Into Service Hole
Courtesy of MAZDA MOTORS CORP.

CENTER SPEAKER INSPECTION

  1. Verify the resistance between center speaker terminals.
    • If the resistance is not within the specification, replace the center speaker.

Resistance

3.6 ohms

  1. Connect a 1.5 V battery to the center speaker and verify that noise is heard from the center speaker.
    • If no noise is heard, replace the center speaker.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.