Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)13 · Body and cab accessories
13 · Body & interior

Manual antenna inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Entertainment › Manual antenna inspection
Body and cab accessoriesManual antenna inspection
ACCESSORIES & BODY, CAB – Entertainment – figure
Fig. 27: Removing Mounting Nut Using Snap Ring Pliers
Courtesy of MAZDA MOTORS CORP.

MANUAL ANTENNA INSPECTION

NOTE: A amplifier is built into the manual antenna.

ANTENNA AMPLIFIER

  1. Turn on the audio unit and radio, and measure the voltage at manual antenna connector terminal C.
    • If the voltage is B+, go to the next step.
    • If the voltage is not B+, inspect the audio unit or the antenna feeder.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.