Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)13 · Body and cab accessories
13 · Body & interior

High-beam

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Lighting Systems › High-beam
Body and cab accessoriesHigh-beam
ACCESSORIES & BODY, CAB – Lighting Systems – figure
Fig. 12: Identifying Discharge Headlight Bulb
Courtesy of MAZDA MOTORS CORP.
  1. Install in the reverse order of removal.

HIGH-BEAM

  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Disconnect the connector.

CAUTION: A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass. Wipe off any finger prints before installation.

  1. Remove the socket, then remove the headlight bulb.
  2. Install in the reverse order of removal.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.