Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)10 · Heating and air conditioning
10 · Heating & A/C

Refrigerant recovery

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Refrigerant System › Refrigerant recovery
Heating and air conditioningRefrigerant recovery · page 1 of 2
HVAC – Refrigerant System – figure
Fig. 11: Installing Caps To Charging Valves
Courtesy of MAZDA MOTORS CORP.

REFRIGERANT RECOVERY

WARNING: Avoid breathing air conditioning refrigerant or lubricant vapor. Exposure may irritate eyes, nose and throat. Also, due to environmental concerns, use service equipment certified to meet the requirements of SAE J2210 (R-134a recycling equipment) when draining R-134a from the air conditioning system. If accidental system discharge occurs, ventilate work area before resuming service.

  1. Connect an R-134a recovery/recycling/recharging device to the vehicle and follow the device manufacturer's instructions.

REFRIGERANT PRESSURE CHECK

  1. Connect the manifold gauge.
  2. Start the engine and arrow it to reach operating temperature.
  3. During pressure check, run the engine at a constant 1,500 rpm .
  4. Set the fan speed MAX-HI.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.