Refrigerant recovery (page 2 of 2)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Refrigerant System
Heating and air conditioningRefrigerant recovery · page 2 of 2
- Turn the A/C switch on.
- Set to RECIRCULATE mode.
- Set the temperature control to MAX COLD.
- Set to VENT mode.
- Close all the doors and all the windows.
- Measure the manifold gauge reading and ambient temperature.
- Verify that the high and low pressure readings are within each shaded zone.
- If there is any malfunction, inspect the refrigerant system according to the troubleshooting chart. See SYMPTOM TROUBLESHOOTING .
Parts & tools for this job For 2006 Mazda MX-5
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Mazda MX-5 2006 cabin filter
As an Amazon Associate we earn from qualifying purchases.