Workshop Manuals Factory service & repair Mazda
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Mazda Tribute DX 2WD L4-2.0L (2001)03 · Maintenance
03 · Maintenance

Vehicle Lifting (Jacking Position): Locations

Make
Mazda
Model
Tribute DX 2WD
Engine
L4-2.0L
Year
2001
Section
Vehicle Lifting › Locations › Jacking Position
MaintenanceJacking Position · page 1 of 2
background image

Vehicle Lifting: Locations
Jacking Position

WARNING:

-

Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.

-

Make sure the jack and jack stands are correctly located to prevent the vehicle from falling.

-

Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack.

Jacking Points - Front

1. The jacking point is a tab that extends from the front suspension lower control arm at the bolt head of the lower control arm.

Jacking Points - Rear

1. The rear jacking points are located on the rear axle.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2001 Mazda Tribute 2.0L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.