Sable V6-183 3.0L DOHC VIN S MFI (1997)
9. Remove crankcase vent connector and hose from upper intake manifold to positive crankcase ventilation valve (PCV valve) at upper intake
manifold.
10. Disconnect main emission vacuum control connector from the upper intake manifold.
11. Remove EGR valve (EGR valve).
CAUTION: When removing engine components, always remove retaining bolts in reverse of tightening sequence (as shown) or damage to engine
components may occur.
12. Remove intake manifold retaining bolts following sequence shown.
13. Remove upper intake manifold and intake manifold upper gaskets from lower intake manifold and discard intake manifold upper gaskets.
INSTALLATION
