Quick fit fuel hose connectors

Quick fit fuel hose connectors

WARNING: Hose connections between the fuel pump and the fuel rail contain fuel under pressure, which MUST be relieved prior to disconnection of the hoses. See ENGINE MANAGEMENT SYSTEM - MEMS, Adjustments.

1. Wipe connection and surrounding area using a lint free cloth.

NOTE: If the connection is heavily soiled with road salt and dirt, gently twist connector while spraying with WD40.

2. If necessary use an air line to remove contaminates from the retainer area of the connector.
3. Depress collar and disconnect hose.
4. Ensure pipe end is clean and free from corrosion.
5. Lubricate pipe end with clean engine oil.
6. Connect hose to pipe and push firmly into position until a click is heard.
7. Check security of connection by pulling on connector.

CAUTION: When checking security of connector pull on connector body NOT on the hose.