Engine Mountings
- Make
- MG
- Model
- MGF Factory Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Engine Mountings
InformationEngine Mountings
Engine Mountings
| Bridge bracket assembly to upper tie bar | 88 Nm |
| Bridge bracket to RH mounting bracket | 155 Nm |
| Buttress LH to subframe | 45 Nm |
| Engine LH mounting to bracket bolts | 45 Nm |
| Engine LH mounting bracket to gearbox bolts | |
| (manual gearbox models) | 45 Nm |
| Engine LH mounting centre bolt | |
| (manual gearbox models) | 82 Nm |
| Gearbox mounting to RH buttress nut and bolt | |
| (EM-CVT only) | 82 Nm |
| LH mounting to engine | 45 Nm |
| LH mounting to gearbox screws (EM-CVT only) | 48 Nm |
| LH mounting to LH upper longitudinal | 80 Nm |
| Lower RH mounting bracket to engine | 60 Nm |
| Lower tie bar to rear subframe | 100 Nm |
| Lower tie bar to sump bracket | 100 Nm |
| Rear engine steady to bracket on sump | 85 Nm |
| Rear engine steady to subframe | 85 Nm |
| Rear mount to subframe bolts | 85 Nm |
| Rear mount to sump | 80 Nm |
| RH buttress to subframe | 45 Nm |
| RH mounting to buttress | 82 Nm |
| RH mounting to RH upper longitudinal | 45 Nm |
| Upper RH mounting bracket to engine | 60 Nm |
| Upper tie bar to RH upper longitudinal | 88 Nm |
* Tighten in sequence + New Patchlok bolt must be fitted.
Parts & tools for this job For 1995 MG MGF
- PARTEngine gasket setSearch: MG MGF 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.