Front Subframe
- Make
- MG
- Model
- MGF Factory Workshop Manual
- Year
- 1995–2000
- Section
- Torque wrench settings › Front Subframe
InformationFront Subframe
Front Subframe
| Clamp plate to subframe | 26 Nm |
| Crush member to subframe | 45 Nm |
| Front mounting to body | 30 Nm |
| Front mounting to subframe | 100 Nm |
| Rear mounting to body | 45 Nm |
| Rear mounting to subframe | 100 Nm |
Rear Subframe
| Clamp plate to subframe | 26 Nm |
| Front mounting to body | 30 Nm |
| Front mounting to subframe | 100 Nm |
| Rear mounting to body | 45 Nm |
| Rear mounting to subframe | 100 Nm |
| LH & RH upper longitudinal bolts | 45 Nm |
Wheel Nuts
| Alloy wheel, nuts | 70 Nm * |
| Spare wheel, nuts | 70 Nm * |
* = Tighten in sequence
Parts & tools for this job For 1995 MG MGF
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual MG MGF
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.