Steering wheel (page 2 of 2)

Refit

1. Position harness to steering wheel and locate to switch recesses.
2. Position gear change switches, connect multiplugs and secure switches to steering wheel.
3. Position horn switches, connect Lucar connections and secure horn switches to steering wheel.
4. Remove tape from rotary coupler.
5. Ensure road wheels are in straight ahead position and indicator cancelling cam is aligned horizontally.
6. Fit steering wheel to column.
7. Connect horn/sequential gear change switch multiplug.
8. Fit and tighten nut securing steering wheel to column to 63 Nm.
9. Fit driver’s airbag. See RESTRAINT SYSTEMS, Repairs.