Airbag and pre-tensioner, manual deployment (page 2 of 2)
- Make
- Mini
- Model
- Mini Workshop Manual
- Year
- 1996–2000
- Section
- Precautions
‹ Prev Airbag and pre-tensioner, manual deploymentNext › Deployment of pre-tensioner removed from vehicle
Restraint systemsAirbag and pre-tensioner, manual deployment · page 2 of 2
- Connect flylead SMD 4082/5 to pre-tensioner connector.
- Connect flylead SMD 4082/5 to tool SMD 4082/1.
- Connect tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are standing at least 15 metres away from vehicle.
- Press both operating buttons to deploy pre-tensioner.
- DO NOT return to the vehicle for 5 minutes.
- Using gloves, remove pre-tensioner from body, place pre-tensioner in plastic bag, and seal bag.
- Transport deployed pre-tensioner to designated area for incineration.
NOTE: DO NOT transport pre-tensioner in the vehicle passenger compartment.
‹ Prev Airbag and pre-tensioner, manual deploymentNext › Deployment of pre-tensioner removed from vehicle
Parts & tools for this job For 1996 Mini Mini
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.