Workshop Manuals Factory service & repair Mini
Mini Mini Workshop Manual (1996-2000)16 · Restraint systems
16 · Body & interior

Deployment of pre-tensioner removed from vehicle

Make
Mini
Model
Mini Workshop Manual
Year
1996–2000
Section
Precautions › Deployment of pre-tensioner removed from vehicle
Restraint systemsDeployment of pre-tensioner removed from vehicle · page 1 of 2

Deployment of pre-tensioner removed from vehicle

These guidelines are written to aid authorised personnel to carry out the safe disposal of the pre-tensioner.

WARNING:

  • Only use the Rover approved deployment equipment.
  • Deploy pre-tensioner in a designated area.
  • Ensure pre-tensioner is not damaged or ruptured before deploying.
  • Notify relevant authorities.
  1. Carry out deployment tool self test.
  2. Remove seat belt pre-tensioner from vehicle. See Repairs.
Deployment of pre-tensioner removed from vehicle – Remove seat belt pre-tensioner from vehicle. See Repairs.
  1. Remove reel from gas generator by cutting flexible link approximately 10 mm from end of gas generator tube.

Parts & tools for this job For 1996 Mini Mini

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.