Diamante Sedan V6-3.5L SOHC (1999)
2. Apply a coating of multipurpose grease to the rack teeth face.
NOTE: Do not block the vent hole in the rack with grease.
3. Cover the rack assembly teeth side using a special tool.
4. Apply specified fluid to the outside of the special tool and the piston seal ring.
Fluid: DEXRON II
5. Slowly insert the rack covered with the special tool from the power cylinder end of the gear housing.
NOTE: When inserting the rack, ensure the oil seal retaining ring does not pop out by keeping the center of the oil seal aligned with the front
end of the special tool.
6. Remove the special tool.
>C< Rack Bush
1. Apply the specified fluid to the inside of the oil seal and the 0-ring.
Fluid: DEXRON II
CAUTION: Do not allow oil seal retainer spring to slip out.
2. Wrap the end of the rack in plastic tape and insert the rack bush into the rack.
>D< Circlip
