Diamante Sedan V6-3.5L SOHC (1999)
![background image](/mitsubishi/diamante_sedan/v6-3.5l_sohc/Page-1399006.png)
1. Align the rack stopper marking with the cylinder slot. Insert the circlip into the cylinder slot and then into the rack stopper hole and turn the
rack stopper in a clockwise direction until the circlip is fully in place.
>E< Upper Oil Seal/Upper Bearing
1. Apply a thin film of the designated fluid to the inside of the seal.
2. Place the upper bearing, then the seal onto the special tool.
3. Lightly press the upper seal and upper bearing into the valve housing.
>F< Seal Ring
1. As the seal rings will be stretched after assembly onto the pinion shaft, use the special tool to compress the seal rings so that they will be well
seated into the grooves and be able to be easily installed without causing any damage to them.
>G< Tie Rod Assembly
>H< Adjusting The Total Pinion Torque