Montero Sport 2WD V6-3.0L SOHC (1997)
E. Lock pin removal. (8)
F. Self-locking nut removal. (17)
Required Special Tool or equivalent:
MB990850: End Yoke Holder.
G. Drive pinion assembly removal.(19)
1. Make the mating marks to the drive pinion and companion flange.
CAUTION: Do not make mating marks on the contact surfaces of the companion flange and propeller shaft.
2. Drive out the drive pinion together with the drive pinion spacer and drive pinion front shims.
H. Drive pinion rear bearing inner race removal. (22)
Required Special Tools or equivalents:
MB990339: Bearing Puller.
MB990648: Bearing Remover.
