Montero XLS 4WD V6-3.5L SOHC (2001)
Power Seat Motor: Testing and Inspection
Operation check of power seat motor
1. Disconnect the connector of each motor.
2. Check that when the battery is directly connected to the motor terminal, the motor turns smoothly and each adjusting mechanism operates as stated
below for each motor.
1. Connect the battery power source to the terminal 1 and ground the terminal 2 for the front height down side, rear slide side and the rear lumbar
support side.
2. Connect the battery power source to the terminal 2 and ground the terminal 1 for the front height up side, front slide side and front lumbar
support side.
3. Connect the battery power source to the terminal 3 and ground the terminal 4 for the rear height down side and connect the battery power
source to the terminal 4 and ground the terminal 3 for the rear height up side.
4. Connect the battery power source to the terminal 2 and ground the terminal 1 for the rear reclining side and connect the battery power source
to the terminal 1 and ground the terminal 2 for the front reclining side.
3. If abnormality was found, check the power seat adjuster assembly.
