Gear Components (Cont'd) - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › Gear Components (Cont'd) - Nissan 180SX S13 Workshop Manual
Gear Components (Cont'd)
ASSEMBLY
Gear Components (Cont'd)
[Tool c @ Use the left chart when deciding the reading torque. (Length of torque wrench vs. setting or reading torque) Torque wrench
9. Tighten countershaft lock nut. = e@ Always use new lock nut. iaeieeeienienaieaestel tm (#2) —————»
0.10 m
(0.33 fr) Nem
= (kg-m) (ft-lb), 157 (16) i , [ ; Pper limit “7 (110) T 147
torque (100)F
Reading {90)F C:
Lower limit line {80)" 108 rl L 1194 05 O06 O07 O68 t- m A A L i (1.5) (2.0) (2.5) (ft) SMTO04A L: Length of torque wrench Mainshaft Countershaft
10. Stake mainshaft lock nut and countershaft lock nut with a punch. 7 ¥ a
11. Measure gear end play. For the description, refer to DIS-
| ASSEMBLY for Gear Components.
= :
Shift Control Components
Fork rod
1. Install shift rods. interlock plunger, interlock balls and check ' 1 a balls.
(st & 2nd)
Ls \/
Fork rod
a '
(3rd & Ath)
i +/F
Interlock plunger
a
Le Interlock
~ Sy bail BS | [ovat . Fork rod Check ball ' _& 8/ (O.D. & Rev.) smT992
a. 1st-2nd shift fork
SMT989 | MT-23 \
Parts & tools for this job For Nissan 180SX
- PARTClutch kitSearch: Nissan 180SX clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Nissan 180SX manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.