REMOVAL AND INSTALLATION - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REMOVAL AND INSTALLATION - Nissan 180SX S13 Workshop Manual
REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
Removal @® Remove shift lever.
@ Remove propeller shaft. — Refer to section PD. | @ Insert plug into rear oil seal after removing propeller shaft. zi 7 @ Be careful not to damage spline, sleeve yoke and rear oil : q seal, when removing propeller shaft. . @ Support engine by placing a jack under oil pan. 7 @ Do not place jack under oil pan drain plug. 4 @ Remove transmission from engine. 4 @ Support manual transmission, while removing it.
. Installation i 4 @ Tighten all transmission bolts. f B ‘ 4 | i tt t “ A ® MIT to engine ;
| Bolt No. | Tightening torque N-m (kg-m, ft-lb) | & mm (in) |
|---|---|---|
| 1 2 | 39 - 49 (4.0 -5.0, 29 - 36) 39 - 49 (4.0 -5.0, 29 - 36) | 80 (3.15) 75 (2.95) |
| 2 3 | 39 - 49 (4.0 -5.0, 29 - 36) | 75 (2.95) |
| 3 4 | 39 - 49 (4.0 - 5.0, 29 - 36) 29 - 39 (3.0 -4.0, 22 - 29) | 65 (2.56) |
| 4 5 | 29 - 39 (3.0 -4.0, 22 - 29) 29 - 39 (3.0 -4.0, 22 - 29) | 40 (1.57) 25 (0.98) |
| 5 Gusset to engine | 29 - 39 (3.0 -4.0, 22 - 29) 29 - 39 (3.0 - 4.0, 22 - 29) | 25 (0.98) 20 (0.79) |
@ Engine (gusset) to M/T
i SMT452B8 : ; be "
MT-5
Parts & tools for this job For Nissan 180SX
- PARTClutch kitSearch: Nissan 180SX clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Nissan 180SX manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.